Prevent seagulls and pigeons from nesting in chimney pots, the slope of a roof, and the chimney stack with Avipoint Chimney Bird Spike - CHI001. This heavy-duty bird spike is made from 3mm stainless steel rods and is each 750mm long, which can be bent into place. It is recommended to be used in conjunction with Avipoint
P14, P20, P32 and G20 bird spikes. It can be easily fixed into position by wedge, screw, or cement. It is supplied flat-packed and made of stainless steel. The spike can be placed inside pots, between rows of pots, or in the "V" shaped area where the stack meets the roof.
Specifications
- Made of 3mm stainless steel rods, each 750mm long
- Can be bent into place
- Supplied flat-packed
- Can be fixed by wedge, screw, or cement
- Suitable for use with Avipoint P14, P20, P32, and G20 bird spikes
- Can be placed inside pots, between rows of pots, or in the "V" shaped area where the stack meets the roof.
Instructions
Avipoint Chimney Bird Spike - CHI001 can be used in three different ways:
- Inside the chimney pot: Bend each side of the spike into a fan that is 3-4 inches wider than the diameter of the chimneypot, then wedge the spike inside the pot until only 6-7 inches of the spikes are protruding above the rim of the pot, which is enough to prevent seagulls from landing.
- In between parallel rows of pots: Use one spike per pair of pots, fold it into a double-fan shape and lay it down the middle of the pots in a continuous fashion with no gaps greater than 100mm between the tips of each system. Cement or screw the units in place.
- In the V-Shaped area behind the chimneystack: Use one spike system for every 300mm of width of the chimney stack. Open the system into a double-fan shape such that the spikes point up the slope of the roof. Secure the longest rod to the back of the chimney stack brickwork top and bottom using the screws and clips provided to firmly anchor it in position.
