Insect-O-Cutor Halo 2x30W Commercial Glueboard Flykiller
£229.99 Exc. VAT
Frequently Bought Together
Combine contemporary aesthetics with heavy-duty commercial pest control using the second-generation Insect-O-Cutor Halo® 2x30W Glueboard Flykiller. Engineered with two 30W units mounted back-to-back, this versatile fly killer delivers 360-degree, front-and-back UV attraction, making it ideal for suspended ceiling installations in open-plan commercial environments, food preparation areas, retail spaces, and hospitality venues.
Designed with both performance and discrete styling in mind, the Halo® features closable light apertures that allow you to maximize UV light output or seal the top against dust ingress. Servicing is completely tool-free: a swing-down front guard provides immediate access to the high-efficacy 15W UV tubes, while the UV-stabilized Glupac® glueboards slide effortlessly out from either side. Built to strict European safety standards, the Halo® 2x30W offers reliable, hygienic, and silent flying insect management for medium to large commercial spaces.
Specifications
- Brand: Insect-O-Cutor
- Model: Halo® 2x30W (Back-to-Back Configuration)
- Total Power Output: 60W (2 x 30W)
- Coverage Type: All-round 360° front and back coverage
- UV Tubes Included: 4 x TPX15-18 (15W high-efficacy UV tubes)
- Glueboards Included: 2 x GB012 Glupac® pheromone-impregnated glueboards with UV stabilizer
- Mounting Options: Suspended ceiling mount (back-to-back)
- Maintenance Access: Tool-free swing-down front guard and dual-side glueboard removal
- Additional Features: Closable light apertures and removable aluminum debris tray
- Certifications: Independently tested and certified to RoHS and all relevant European standards
Directions of Use
- Unpack & Inspect: Remove the Insect-O-Cutor Halo® 2x30W from its packaging and verify that all four TPX15-18 UV tubes and two GB012 glueboards are intact.
- Prepare the Glueboards: Peel the protective release paper off both GB012 Glupac® glueboards. Slide one board into each side of the unit via the dedicated side-access slots until securely seated.
- Adjust Light Apertures: Set the closable light apertures according to your environment—leave them open for maximum upward UV light dispersion, or close them to prevent dust from settling inside the unit.
- Mount the Unit: Suspend the back-to-back unit securely from the ceiling in a central area away from direct sunlight, drafts, and competing light sources, at a recommended height of 2 to 2.5 meters.
- Power On: Connect the unit to a standard mains power supply and switch it on.
- Routine Maintenance: Check glueboards every 4 to 6 weeks (or more frequently during peak fly seasons) and slide in fresh GB012 replacements as needed. Replace the 15W UV tubes annually, ideally in spring, to maintain optimal UV output, even if the tubes still appear to emit visible blue light.
Frequently Asked Questions
Q: Where is the best place to install the Insect-O-Cutor Halo® 2x30W? Because the 2x30W model is configured back-to-back for 360-degree attraction, it is designed for suspended ceiling installation in the center of large, open commercial areas such as commercial kitchens, supermarkets, restaurants, and warehouses. Avoid placing it directly over open food preparation surfaces or near windows and doors.
Q: Do I need tools to change the UV tubes or glueboards? No. The Halo® is engineered for completely tool-free servicing. The glueboards slide out easily from either side of the unit, and the front guard swings down smoothly to give full access to the four 15W UV tubes and the removable aluminum debris tray.
Q: How often should I replace the glueboards and UV tubes? Glupac® GB012 glueboards should be replaced every 4 to 6 weeks, or sooner if they become full of insects or dust. The four TPX15-18 UV tubes should be replaced once every 12 months, as their UV-A attraction output degrades over time even when the bulbs still glow.
Q: What is the purpose of the closable light apertures? The adjustable apertures let you customize the unit for your facility. You can keep them open to maximize UV light projection, or close them in dustier environments (such as bakeries or dry-goods storage) to prevent debris from entering the top of the unit.