The Spray-Matic 5 S is a top-of-the-line 5-litre Birchmeier stainless steel compression sprayer that comes equipped with a hand pump and compressed-air connection. It boasts outstanding performance and durability, making it a reliable choice for various applications. With a robust piston valve assembly made of brass and chemical-resistant Viton gaskets, this sprayer ensures efficient and leak-free operation. The tank, constructed from high-quality stainless steel, offers excellent resistance to chemicals and corrosion. Its design features, such as the fixed hose coupling on the container's top and a large filling opening, make it easy to use and maintain. The Spray-Matic 5 S is perfect for tasks such as impregnation, dissolution of wallpaper, formwork release oil application, and more.
Specifications
-
Filling capacity (Volume, l): 5
-
Max. working pressure (bar): 6
-
Nozzle type: Adjustable nozzle 1.3 mm
-
Spray pattern: Adjustable nozzle
-
Nozzles material: Brass
-
Material Device/container: Stainless steel
-
Material Fittings: Plastic / brass, brass
-
Fitting connectors: Screw fitting
-
Stress class: Very heavy-duty
-
Dimensions (mm): 190x190x460
-
Weight (kg): 3.5
-
Device type: Compression sprayer stainless steel
-
Special function: Gaskets Viton
-
Application: Water, Impregnation, Mineral oil-based solvent, Formwork release oil / Release agents, Dissolution of wallpaper
-
Form of application: Liquid
Instructions for Use
- Preparation of the Sprayer:
- Fit the hose, hand-lever valve, and spray wand securely.
- Perform a function test by briefly lifting the pressure relief valve.
- Prior to each filling, release the pressure in the tank by lifting the pressure relief valve.
- Unscrew the filler cap by turning it a quarter turn while tilting it downwards and inwards.
- Fill the tank with a maximum of 2, 5, 10, or 20 liters, leaving some space for an air cushion.
- Ensure the O-Ring is evenly applied around the entire tank opening and snap the locking clip fully over it when closing the cover.
Operation
- Air-pump: Release the pump handle by pressing down lightly and turning it to the left. Pump up until the red mark appears on the pressure relief valve or air stops escaping. The operating pressure (6 bar) is now reached. Fix the pump handle in the locked position again.
- Compressed air: Always unlock the handle for inflating. Use a pressure reducing valve, set to a maximum pressure of 6 bar. Once the pressure reaches 6 bar, remove the pressure source.
The liquid is sprayed by operating the spray-gun. Adjust the spray pattern by turning the middle part of the adjustable nozzle.
After spraying, and before opening the tank, interrupt the air supply and completely discharge the pressure by lifting the pressure relief valve.
Instructions Manual
